CGRDN - BISMUTH, ATOMIC ABSORPTION STANDARDS, BX0788
- MSDS: CGRDN
- Manufacturer: EM SCIENCE
- Product Name: BISMUTH, ATOMIC ABSORPTION STANDARDS, BX0788
- National Stock Number: 6810-00N083692
Product Identification
Product ID:BISMUTH, ATOMIC ABSORPTION STANDARDS, BX0788
MSDS Date:01/10/1996
FSC:6810
NIIN:00N083692
MSDS Number: CGRDN
Responsible Party
GIBBSTOWN, NJ 08027
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 609-423-6300
Cage: DO242
Contractor
Telephone: 800-424-9300 (CHEMTREC)
Cage: DO242
Ingredients
5); (BISMUTH NITRATE)
CAS: 10035-06-0
RTECS: EB2984430
Fraction By Weight: 0-1%
OSHA PEL N/K
ACGIH TLV: N/K
NITRIC ACID (SARA 302/313) (CERCLA)
CAS: 7697-37-2
RTECS: QU5775000
Fraction By Weight: 1-2%
OSHA PEL 2 PPM
ACGIH TLV: 2 PPM/4 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 98-99%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY BE IRRITATING ON CONTACT
WITH SKIN, EYES OR MUCOUS MEMBRANES. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
IMMED FLUSH THOROUGHLY W/LARGE AMOUNTS OF WATER. EYES: IMMED FLUSH
THOROUGHLY W/WATER FOR AT LEAST 15 MINUTES. INHALATION: REMOVE TO
FRESH A IR; GIVE ARTIFICIAL RESPIRATION IF BREATHING HAS STOPPED.
INGESTION: IF CONSCIOUS, DRINK WATER & INDUCE VOMITING IMMED AS
DIRECTED BY MEDICAL PERSONNEL. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCON PERS.
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:USE ANY SUITABLE FOR ADJACENT MATERIAL.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE INDICATED.
Accidental Release
Spill Release Procedures:EVACUATE AREA OF ALL UNNEC PERS. WEAR SUITABLE
PROT EQUIP. ELIM ANY IGNIT SOURCES UNTIL AREA IS DETERMINED TO BE
FREE FROM EXPLO/FIRE HAZS. CONTAIN RELEASE & ELIM ITS SOURCE, IF
THIS CAN BE DONE W/OUT RISK. TAKE UP & CONTAINERIZE FOR PROPER
(SUP DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
STORE AT CONTROLLED ROOM TEMPERATURE. DO NOT BREATHE SOLUTION MIST.
DO NOT GET IN EYES, ON SKIN/ON CLOTHING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MATERIAL SHOULD BE HANDLED OR TRANSFERRED IN AN APRPOVED
FUME HOOD OR WITH ADEQUATE VENTILATION.
Protective Gloves:NEOPRENE OR EQUIVALENT.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
INTERNALLY.
Supplemental Safety and Health
SPILL PROC: DISP. COMPLY W/FED, STATE, & LOC REGS ON REPORTING
RELEASES. REFER TO REGULATORY INFO FOR REPORTABLE QTY & OTHER
REGULATORY DATA.
Chemical Properties
Solubility in Water:SOLUBLE
Appearance and Odor:COLORLESS LIQUID
Percent Volatiles by Volume:>99.5
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE INDICATED.
Hazardous Decomposition Products:NO*X.
Disposal
Waste Disposal Methods:EPA WASTE NUMBER: D002. SPECIFIED
TECHNOLOGY-NEUTRALIZE TO PH 6-9. CONT YOUR LOC PERMITTED WASTE
DISPOSAL SITE (TSD) FOR PERMISSIBLE TREATMENT SITES. ALWAYS CONT
PERMITTED WASTE DISPOSER (TSD) TO ASSU RE COMPLIANCE W/ALL CURRENT
LOC, STATE & FED REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.